TRUE METRIX GO Blood Glucose Meter

TRUE METRIX GO Blood Glucose Meter kit was designed to improve accuracy with its TRIPLE SENSE TECHNOLOGY. With Trividia's TRIPLE SENSE TECHNOLOGY, the TRUE METRIX GO automatically detects, analyzes and corrects variables in each blood sample to ensure proven accuracy and provides you confidence in the results. With this meter you get enhanced performance averaging in 7, 14 and 30 days. You are able to download the results from the meters memory giving the user the ability to track their blood glucose results more easily.

TRUE METRIX GO Features:

• No Coding required.
• Control Detection
• 7, 14 and 30 day averaging.
• Able to store 500 results with time/date.
• Results in as fast as 4 seconds.
• Tiny 0.5 microliter sample.
• Download capabilities.
• MPN: 56151195002
• Contains 1 TRUE METRIX GO self-monitoring blood glucose meter kit.

TRUE METRIX GO Meter Kit Contents:

• TRUE METRIX GO Meter
• Installed 3 Volt Battery
• Lancing Device
• 10 Sterile Lancets
• Instructions for Use
• Self Test Log Book
• Compact Carry Case

Note: Control solutions and test strips are required but not included in this product and must be purchased separately

To Attach/Remove TRUE METRIX GO Meter to Test Strip Vial:

Note: The meter may be used for testing without attaching to the vial.

To Attach

1. Set test strip vial on flat surface with vial lip facing to the left.
2. With the test port facing the front, place the bottom of the meter firmly on the vial top. Meter must be seated flat on top of the vial cap.
3. Holding the vial, twist the meter 1/4 turn clockwise. The Test Port area on the meter should cover the vial lip if attached properly.

To Remove

1. Holding the vial, twist the meter 1/4 turn counter clockwise.
2. Lift the meter off the vial cap.

Getting Started with Your TRUE METRIX GO Meter:

The meter comes with a pre-set time and date. You must make sure the time and date is correct before using the meter for the first time or after a battery change. Be sure to check time and date often and update as needed.

When the meter turn on:

• A test strip is inserted into the test port.
• When Set Button is pressed and released - the Set Button can be found on the top of the meter.

Meter turns off when:

• The test strip is released from the meter.
• The Set Button is pressed and healed for three seconds.
• After 2 minutes of non-use.